Mostrando entradas con la etiqueta 3D. Mostrar todas las entradas
Mostrando entradas con la etiqueta 3D. Mostrar todas las entradas

martes, 23 de mayo de 2017

PLAYMOBIL DIORAMA – MEDIEVAL STOCKS


Nos ha llegado una fantástica pieza de 3D fabricada por PLAYMOLOOK. El cepo medieval. Es una de esas piezas que siempre deseas tener. Playmobil ya tuvo la idea de hacerla, pero no llegó a ponerla en producción. Años después ha sacado una pieza (30218703) en su referencia 6156, que aunque está muy bien y encaja a la perfección en muchas de nuestras aventuras, no llega a la idea del cepo medieval que muchos teníamos en la cabeza.



La pieza de PLAYMOLOOK es magnífica, y tiene un diseño muy Playmobil, que se puede colocar en casi cualquier escenario medieval. Nosotros hemos optado por hacer una pequeña recreación para nuestros normandos. Un señor de la guerra está dando un escarmiento a un aldeano que ha sido sorprendido cazando en sus dominios. Se trata de un noble magnánimo y, por esta vez, no mandará amputar ningún miembro a este vasallo díscolo. ¡De buena se ha librado!, pero tendrá que pasar una semana expuesto en el cepo para purgar su penitencia.


Hemos incluido algunos personajes que ya conocéis para que adornen la escena.  Esperamos que os guste.




------------------------------------

A new fantastic piece of 3D made by PLAYMOLOOK was sent to us: A medieval stocks. It's one of those pieces that we always wanted to have. Playmobil already had the idea to do it, but did not get to put it into production. Years later they has produced a similar piece (30218703) included in the reference 6156. Although it is pretty well done and fits perfectly in many of our adventures, it is not  an idea of the medieval stocks that many of us had in our head.

The PLAYMOLOOK piece is magnificent, and looks like very Playmobil. You can placed it in almost any medieval setting. We have chosen it to make a little diorama of our Normans after the conquest of England. A warlord is giving a message to a villager who has been caught hunting in his domains. He is a magnanimous nobleman, and for this time he will have no member amputated to this bad vassal. He has been saved, but he will have to spend a week in the stocks to purge his penance.

We have included some characters that you already know to improve the scene. We hope you like it. 

viernes, 16 de septiembre de 2016

PLAYMOBIL CUSTOM VIKING SHIP I3D (V)


En este caso y gracias también a I3D tenemos disponible una versión alternativa de dragón serpiente que queda francamente bien. Nos encanta.



Las imágenes hablan solas.


¿Cómo se pueden conseguir? Muy fácil, enviando un correo electrónico a imprimimostresd@gmail.com y se pide la combinación o combinaciones que queráis.


MAD ON PLAYMOBIL no gestiona la impresión o venta de estas piezas. Somos un cliente más y solamente deseamos que funcione muy bien, porque será la vía para nuevos proyectos de colaboración.

¿Cuánto cuestan? 17 € dos piezas (delantera y trasera). Para pedidos de más de tres juegos,  hay un descuento (15 € cada juego).

¿Hace falta alguna cosa más? Las piezas necesitan algo de lija para dejarlas perfectas, sobre todo en el lado que le sirve de base. Al final se han impreso en rojo, porque las hemos pintado para darles un mejor aspecto, utilizando la recomendación de Antonio de PLAYMOGALICIA, sobre las pinturas MONTANA 94.


Esperamos que os resulte interesante. Gracias a todos por vuestro apoyo.

IMPORTANTE: Queremos dejar claro que no se trata de un producto Playmobil original. Se trata de un producto compatible con la marca que está dirigido al público adulto. Su producción no tiene ningún ánimo de lucro. El diseño pertenece a IMPRIMIMOS3D que elabora las piezas para cubrir la demanda de piezas de colección que no pueden ser obtenidas por otros medios. No se trata de productos destinados al público infantil, ni de fabricación masiva, ni destinados a la reventa o la reproducción por otros medios. La adquisición de las piezas se enmarca dentro de un acuerdo entre particulares. Tanto MADONPLAYMOBIL como IMPRIMIMOS3D respetamos y aceptamos las políticas de Playmobil al respecto.

-----------------

In this case and thanks to 3DP have available an alternative version of snake dragon is really well. We love. The images speak for themselves.

How you can get them? Very easy, you must send an email to imprimimostresd@gmail.com with the combination or combinations that you need. MAD ON PLAYMOBIL does not manage the printing or sale of these parts. We are also customers and we want that the project works just fine, because it will be the way for new collaborative projects.

How much they cost? 17 € two pieces (front and rear). For orders of more than three sets, there is a discount (15 € each set). Shipping costs are separate and sent by registered mail.

Anything else is needed? The pieces need some sandpaper to let them perfect, especially on some parts. At the end they are printed in red, because we have painted to give them a better look, using the recommendation of Antonio of PLAYMOGALICIA, about MONTANA94 paintings.

We hope you find interesting. Thank you all for your support.

IMPORTANT: We want to make clear that it is NOT an original Playmobil product. It is a product compatible with Playmobil that is aimed at adults. Its production has no profit. The design belongs to IMPRIMIMOS3D that makes the pieces to meet the demand for collection pieces that can not be obtained by other means. It is not about products aimed at children, or mass production or for resale or reproduction by other means. The acquisition of the pieces is part of an agreement between private parties. Both MADONPLAYMOBIL as IMPRIMIMOS3D respect and accept Playmobil policies in this regard.

miércoles, 14 de septiembre de 2016

PLAYMOBIL CUSTOM VIKING SHIP I3D (IV)


Nuestra siguiente combinación, y no por eso menos deseada, es otro dragón, “en singular, era dreki; en plural, drekkar, de manera que drakkar es deformación de lo que significaba «dragones», «mascarones», o bien «barcos»” (Velasco, Manuel 2008 Breve Historia de los Vikingos, p. 69). Está inspirado en la maqueta del barco vikingo de Revell. Podíamos hacer otro barco vikingo, que quedaría de cine, pero nos hemos atrevido con uno normando (al estilo del tapiz de Bayeux) y eso que nos faltan los escudos de lágrima para recubrirlo, aunque le hemos hecho un pequeño apaño. 


La inspiración la hemos tomado de esta lámina que tan bien recoge el momento del desembarco de las tropas normandas en Inglaterra realizada por Peter Jackson.


Para la vela también hemos utilizado GOMAEVA y rotuladores permanentes. La pintura también es de MONTANA 94 y los detalles están hechos con rotulador.





¿Cómo se pueden conseguir? Muy fácil, enviando un correo electrónico a imprimimostresd@gmail.com y se pide la combinación o combinaciones que queráis. 


MAD ON PLAYMOBIL no gestiona la impresión o venta de estas piezas. Somos un cliente más y solamente deseamos que funcione muy bien, porque será la vía para nuevos proyectos de colaboración.

¿Cuánto cuestan? 17 € dos piezas (delantera y trasera). Para pedidos de más de tres juegos,  hay un descuento (15 € cada juego).

¿Hace falta alguna cosa más? Las piezas necesitan algo de lija para dejarlas perfectas, sobre todo en el lado que le sirve de base. Al final se han impreso en rojo, porque las hemos pintado para darles un mejor aspecto, utilizando la recomendación de Antonio de PLAYMOGALICIA, sobre las pinturas MONTANA94.

Esperamos que os resulte interesante. Gracias a todos por vuestro apoyo.

IMPORTANTE: Queremos dejar claro que no se trata de un producto Playmobil original. Se trata de un producto compatible con la marca que está dirigido al público adulto. Su producción no tiene ningún ánimo de lucro. El diseño pertenece a IMPRIMIMOS3D que elabora las piezas para cubrir la demanda de piezas de colección que no pueden ser obtenidas por otros medios. No se trata de productos destinados al público infantil, ni de fabricación masiva, ni destinados a la reventa o la reproducción por otros medios. La adquisición de las piezas se enmarca dentro de un acuerdo entre particulares. Tanto MADONPLAYMOBIL como IMPRIMIMOS3D respetamos y aceptamos las políticas de Playmobil al respecto.

---------

Our next combination, and no less desired, is a dragon, "in the singular, was Dreki; plural, drekkar, so longship is deformation which meant "dragons", "masks" or "boats" "(Velasco, Manuel 2008 Brief History of the Vikings, p. 69). It is inspired by the model of Revell Viking ship. We could do another Viking ship, which we love, but we have dared with a Norman war ship (Bayeux style) althought that we lack teardrop shields to cover it, but we have made a small trick. 

We also have taken inspiration from this picture so well reflects the time of the landing of Norman troops in England made by Peter Jackson.

The sail is made using Foamy and permanent markers. Painting is also MONTANA 94 and the details are made with a marker.

How you can get them? Very easy, you must send an email to imprimimostresd@gmail.com with the combination or combinations that you need. MAD ON PLAYMOBIL does not manage the printing or sale of these parts. We are also customers and we want that the project works just fine, because it will be the way for new collaborative projects.

How much they cost? 17 € two pieces (front and rear). For orders of more than three sets, there is a discount (15 € each set). Shipping costs are separate and sent by registered mail.

Anything else is needed? The pieces need some sandpaper to let them perfect, especially on some parts. At the end they are printed in red, because we have painted to give them a better look, using the recommendation of Antonio de PLAYMOGALICIA, about MONTANA94 paintings.

We hope you find it interesting. Thank you all for your support.

IMPORTANT: We want to make clear that it is NOT an original Playmobil product. It is a product compatible with Playmobil that is aimed at adults. Its production has no profit. The design belongs to IMPRIMIMOS3D that makes the pieces to meet the demand for collection pieces that can not be obtained by other means. It is not about products aimed at children, or mass production or for resale or reproduction by other means. The acquisition of the pieces is part of an agreement between private parties. Both MADONPLAYMOBIL as IMPRIMIMOS3D respect and accept Playmobil policies in this regard.

viernes, 9 de septiembre de 2016

PLAYMOBIL CUSTOM VIKING SHIP I3D (III)


Un dragón fantástico. Este diseño no es fiel a la realidad pero creo que puede funcionar bien con otras temáticas menos rigurosas de caballeros de Playmobil, como los caballeros del dragón rojo o los bárbaros. Aún tenemos alguna idea para mejorarlo.



En este caso, creo que la combinación ganadora es el color negro. ¡Terrible! A mi hijo pequeño le encanta.



¿Cómo se pueden conseguir? Muy fácil, enviando un correo electrónico a imprimimostresd@gmail.com y se pide la combinación o combinaciones que queráis. 



MAD ON PLAYMOBIL no gestiona la impresión o venta de estas piezas. Somos un cliente más y solamente deseamos que funcione muy bien, porque será la vía para nuevos proyectos de colaboración.

¿Cuánto cuestan? 17 € dos piezas (delantera y trasera). Para pedidos de más de tres juegos,  hay un descuento (15 € cada juego).

¿Hace falta alguna cosa más? Las piezas necesitan algo de lija para dejarlas perfectas, sobre todo en el lado que le sirve de base. Al final se han impreso en rojo, porque las hemos pintado para darles un mejor aspecto, utilizando la recomendación de Antonio de PLAYMOGALICIA, sobre las pinturas MONTANA94.


Esperamos que os resulte interesante. Gracias a todos por vuestro apoyo.

IMPORTANTE: Queremos dejar claro que no se trata de un producto Playmobil original. Se trata de un producto compatible con la marca que está dirigido al público adulto. Su producción no tiene ningún ánimo de lucro. El diseño pertenece a IMPRIMIMOS3D que elabora las piezas para cubrir la demanda de piezas de colección que no pueden ser obtenidas por otros medios. No se trata de productos destinados al público infantil, ni de fabricación masiva, ni destinados a la reventa o la reproducción por otros medios. La adquisición de las piezas se enmarca dentro de un acuerdo entre particulares. Tanto MADONPLAYMOBIL como IMPRIMIMOS3D respetamos y aceptamos las políticas de Playmobil al respecto.

------------

Our fantasy dragon. This design is not accurate but I think it can work well with other fantastic  themed Knights Playmobil, like red dragon knights or barbarians.

In this case, I believe the winning combination is the black color. Terrible! My little son loves it.

How you can get them? Very easy, you must send an email to imprimimostresd@gmail.com with the combination or combinations that you need. MAD ON PLAYMOBIL does not manage the printing or sale of these parts. We are also customers and we want that the project works just fine, because it will be the way for new collaborative projects.

How much they cost? 17 € two pieces (front and rear). For orders of more than three sets, there is a discount (15 € each set). Shipping costs are separate and sent by registered mail.

Anything else is needed? The pieces need some sandpaper to let them perfect, especially on some parts. At the end they are printed in red, because we have painted to give them a better look, using the recommendation of Antonio de PLAYMOGALICIA, about MONTANA94 paintings.

We hope you find interesting. Thank you all for your support.

IMPORTANT: We want to make clear that it is NOT an original Playmobil product. It is a product compatible with Playmobil that is aimed at adults. Its production has no profit. The design belongs to IMPRIMIMOS3D that makes the pieces to meet the demand for collection pieces that can not be obtained by other means. It is not about products aimed at children, or mass production or for resale or reproduction by other means. The acquisition of the pieces is part of an agreement between private parties. Both MADONPLAYMOBIL as IMPRIMIMOS3D respect and accept Playmobil policies in this regard.

miércoles, 7 de septiembre de 2016

PLAYMOBIL CUSTOM VIKING SHIP I3D (II)


Nuestro siguiente barco personalizado con piezas impresas en 3D busca más parecerse a un barco de carga (knarr). Hemos utilizado los remates en espiral, más pequeños, pero que le dan un aspecto impecable, aunque sabemos que muchos barcos no llevaban nada.


Como último detalle una vela con costura romboidal, también en GOMAEVA. Solamente le faltaría acondicionar la base, quitando los asientos de los remeros para que pueda llevar mercancías y ganado, pero eso es demasiado trabajo por el momento. Nos conformamos con este resultado, pero todo se andará…




¿Os gusta? Nosotros estamos encantados y nos gustaría conocer vuestra opinión.




¿Cómo se pueden conseguir? Muy fácil, enviando un correo electrónico a imprimimostresd@gmail.com y se pide la combinación o combinaciones que queráis. 



MAD ON PLAYMOBIL no gestiona la impresión o venta de estas piezas. Somos un cliente más y solamente deseamos que funcione muy bien, porque será la vía para nuevos proyectos de colaboración.

¿Cuánto cuestan? 17 € dos piezas (delantera y trasera). Para pedidos de más de tres juegos,  hay un descuento (15 € cada juego).

¿Hace falta alguna cosa más? Las piezas necesitan algo de lija para dejarlas perfectas, sobre todo en el lado que le sirve de base. Al final se han impreso en rojo, porque las hemos pintado para darles un mejor aspecto, utilizando la recomendación de Antonio de PLAYMOGALICIA, sobre las pinturas MONTANA94.

Esperamos que os resulte interesante. Gracias a todos por vuestro apoyo.

IMPORTANTE: Queremos dejar claro que no se trata de un producto Playmobil original. Se trata de un producto compatible con la marca que está dirigido al público adulto. Su producción no tiene ningún ánimo de lucro. El diseño pertenece a IMPRIMIMOS3D que elabora las piezas para cubrir la demanda de piezas de colección que no pueden ser obtenidas por otros medios. No se trata de productos destinados al público infantil, ni de fabricación masiva, ni destinados a la reventa o la reproducción por otros medios. La adquisición de las piezas se enmarca dentro de un acuerdo entre particulares. Tanto MADONPLAYMOBIL como IMPRIMIMOS3D respetamos y aceptamos las políticas de Playmobil al respecto.

----------------------

Our next custom ship with printable 3D pieces looks like a cargo ship (Knarr). We used spikes spiral smaller, but they give a flawless appearance, although we know that many ships wore nothing.

As a last detail a sail with rhomboid seam, also in foamy. Only condition would be missing the base, removing the seats of the rowers so you can carry goods and cattle, but that's too much work for the moment. We are satisfied with this result, but everything will come ...

Do you like it? We are delighted and we like to know your opinion.

How you can get them? Very easy, you must send an email to imprimimostresd@gmail.com with the combination or combinations that you need. 
MAD ON PLAYMOBIL does not manage the printing or sale of these parts. We are also customers and we want that the project works just fine, because it will be the way for new collaborative projects.

How much they cost? 17 € two pieces (front and rear). For orders of more than three sets, there is a discount (15 € each set). Shipping costs are separate and sent by registered mail.

Anything else is needed? The pieces need some sandpaper to let them perfect, especially on some parts. At the end they are printed in red, because we have painted to give them a better look, using the recommendation of Antonio de PLAYMOGALICIA, about MONTANA94 paintings.

We hope you find it interesting. Thank you all for your support.


IMPORTANT: We want to make clear that it is NOT an original Playmobil product. It is a product compatible with Playmobil that is aimed at adults. Its production has no profit. The design belongs to IMPRIMIMOS3D that makes the pieces to meet the demand for collection pieces that can not be obtained by other means. It is not about products aimed at children, or mass production or for resale or reproduction by other means. The acquisition of the pieces is part of an agreement between private parties. Both MADONPLAYMOBIL as IMPRIMIMOS3D respect and accept Playmobil policies in this regard.

viernes, 2 de septiembre de 2016

PLAYMOBIL CUSTOM VIKING SHIP I3D (I)

Aquí está nuestro primer barco vikingo personalizado con piezas de impresión 3D. Se trata de la serpiente “Jörmundgander”, que vive en las aguas de Midgard, esperando la llegada del Ragnarök, hija de Loki y Angrboda, la gigante. Una terrible visión para quien la aviste desde la costa. Está claramente inspirado en el barco de Oseberg.


Nuestros vikingos no solamente la han colocado en su proa, además la llevan también en su vela, para aterrorizar a sus enemigos.


Estamos contentísimos con el resultado que hemos conseguido con este barco. Ni en sueños podríamos haber pensado en conseguir algo así. Las piezas de la serpiente están pintadas en marrón para darle un aspecto de continuidad al barco. La vela está hecha en GOMAEVA y la serpiente está pintada con rotulador indeleble. El diseño lo hemos copiado de un escudo de una figura de White Tower Miniatures.



Listo para surcar el mar en busca de botín y aventuras. Odin!


¿Cómo se pueden conseguir? Muy fácil, enviando un correo electrónico a imprimimostresd@gmail.com y se pide la combinación o combinaciones que queráis.


MAD ON PLAYMOBIL no gestiona la impresión o venta de estas piezas. Somos un cliente más y solamente deseamos que funcione muy bien, porque será la vía para nuevos proyectos de colaboración.

¿Cuánto cuestan? 17 € dos piezas (delantera y trasera). Para pedidos de más de tres juegos,  hay un descuento (15 € cada juego). Gastos de envío aparte.

¿Hace falta alguna cosa más? Las piezas necesitan algo de lija para dejarlas perfectas, sobre todo en el lado que le sirve de base. Al final se han impreso en rojo, porque las hemos pintado para darles un mejor aspecto, utilizando la recomendación de Antonio de PLAYMOGALICIA, sobre las pinturas MONTANA94.

Esperamos que os resulte interesante. Gracias a todos por vuestro apoyo.

IMPORTANTE: Queremos dejar claro que no se trata de un producto Playmobil original sino de un producto compatible con la marca que está dirigido al público adulto. Su producción no tiene ningún ánimo de lucro. El diseño pertenece a IMPRIMIMOS3D que elabora las piezas para cubrir la demanda de piezas de colección que no pueden ser obtenidas por otros medios. No se trata de productos destinados al público infantil, ni de fabricación masiva, ni destinados a la reventa o la reproducción por otros medios. La adquisición de las piezas se enmarca dentro de un acuerdo entre particulares. Tanto MADONPLAYMOBIL como IMPRIMIMOS3D respetamos y aceptamos las políticas de Playmobil al respecto.

-------------------------

Here is our first custom Viking ship with 3D printable parts. The serpent "Jörmundgander" which lives in the waters of Midgard, is awaiting the arrival of Ragnarök, the son of Loki and Angrboda, the giant woman. A terrible sight for whom sighted it from the coast, clearly inspired by the Oseberg ship.

Our Vikings not only been placed it on the bow, plus they also take it in the sail, to terrorize their enemies.

We are thrilled with the results that we have achieved with this boat. Even in dreams we could have thought of getting something like this. Snake parts are painted in brown to give an appearance of continuity to the ship. The sail is made in foamy and the snake is painted with indelible marker. I have copied the design of a shield of a figure of WhiteTower Miniatures.

Ready to sail the sea in search of booty and adventure. Odin!

How you can get them? Very easy, you must send an email to imprimimostresd@gmail.com with the combination or combinations that you need. MAD ON PLAYMOBIL does not manage the printing or sale of these parts. We are also customers and we want that the project works just fine, because it will be the way for new collaborative projects.

How much they cost? 17 € two pieces (front and rear). For orders of more than three sets, there is a discount (15 € each set). Shipping costs are separate and sent by registered mail.

Anything else is needed? The pieces need some sandpaper to let them perfect, especially on some parts. At the end they are printed in red, because we have painted to give them a better look, using the recommendation of Antonio de PLAYMOGALICIA, about MONTANA94 paintings.

We hope you find it interesting. Thank you all for your support.

IMPORTANT: We want to make clear that it is NOT an original Playmobil product. It is a product compatible with Playmobil that is aimed at adults. Its production has no profit. The design belongs to IMPRIMIMOS3D that makes the pieces to meet the demand for collection pieces that can not be obtained by other means. It is not about products aimed at children, or mass production or for resale or reproduction by other means. The acquisition of the pieces is part of an agreement between private parties. Both MADONPLAYMOBIL as IMPRIMIMOS3D respect and accept Playmobil policies in this regard.

jueves, 1 de septiembre de 2016

PLAYMOBIL 3D PRINTABLE PARTS (IV)

Sí, se puede. Todo empezó con un correo electrónico el 24 de mayo y hoy podemos decir que lo hemos conseguido, no solos, sin ayuda no podríamos haber alcanzado nuestro objetivo.


Hoy os presentamos las piezas definitivas para nuestros barcos vikingos impresas en 3D, que queremos compartir con todos vosotros.

El camino ha sido largo y jamás lo habríamos conseguido sin la involucración de José Luis Dimar de I3D. Nuestro agradecimiento debe ir por delante, porque creyó que se podía hacer, porque ha dedicado mucho de su tiempo a este proyecto (pudiendo hacer otras muchas cosas), y porque nos ha dado durante estos meses algo muy importante para nosotros: su amistad. Gracias Jose.

El trabajo principal ha sido fabricar el enganche, y posteriormente se le han añadido diferentes terminaciones para poder disponer de varios barcos. Con las combinaciones que hemos impreso se pueden montar inicialmente 5 barcos:

La serpiente. Inspirada en el barco de Oseberg, que también nos sugirió Juan Antonio.



- La espiral, que fue ampliamente votada en la encuesta.


- El dragón redondo. Nos encanta!


- Otras dos versiones de dragones, uno de ellos más fantástico y menos riguroso, que puede utilizarse para otras temáticas.


Mañana empezamos a colgar entradas con los barcos que hemos hecho, ya terminados para que podáis comprobar cómo quedan. Haremos una entrada monográfica para cada barco que colgaremos cada viernes y miércoles. Si tenéis cualquier duda o sugerencia, por favor, preguntad. 

¿Cómo se pueden conseguir? Muy fácil, enviando un correo electrónico a imprimimostresd@gmail.com y se pide la combinación o combinaciones que queráis. 

MAD ON PLAYMOBIL no gestiona la impresión o venta de estas piezas. Somos un cliente más y solamente deseamos que funcione muy bien, porque será la vía para nuevos proyectos de colaboración.

¿Cuánto cuestan? 17 € dos piezas (delantera y trasera). Para pedidos de más de tres juegos,  hay un descuento (15 € cada juego). Los gastos de envío son aparte y se envía por correo certificado.

¿Hace falta alguna cosa más? Las piezas necesitan algo de lija para dejarlas perfectas, sobre todo en el lado que le sirve de base. Al final se han impreso en rojo, porque las hemos pintado para darles un mejor aspecto, utilizando la recomendación de Antonio de PLAYMOGALICIA, sobre las pinturas MONTANA94.

Esperamos que os resulte interesante. Gracias a todos por vuestro apoyo.

IMPORTANTE: Queremos dejar claro que no se trata de un producto Playmobil original sino de un producto compatible con la marca que está dirigido al público adulto. Su producción no tiene ningún ánimo de lucro. El diseño pertenece a IMPRIMIMOS3D que elabora las piezas para cubrir la demanda de piezas de colección que no pueden ser obtenidas por otros medios. No se trata de productos destinados al público infantil, ni de fabricación masiva, ni destinados a la reventa o la reproducción por otros medios. La adquisición de las piezas se enmarca dentro de un acuerdo entre particulares. Tanto MADONPLAYMOBIL como IMPRIMIMOS3D respetamos y aceptamos las políticas de Playmobil al respecto.


-----------------

Yes you can. It all started with an email on May 24 and today we can say that we have achieved, not alone, without help we could not have achieved our goal.

Today we want to share with all of you the final pieces for our 3D printed Viking ships.

The road has been very long and we would have never achieved without the involvement of Jose Luis Dimar of I3D. Our thanks must go ahead, because he believed it could be done, because he has devoted much of his time to this project (he can do many other things), and he has given us during these months something very important for us: his friendship. Thanks Jose.

The main work has been to make the master piece, and subsequently different endings have been added in order to have several boats. With the combinations that we have printed can be initially fitted with 5 boats:

- The serpent. Inspired by the Oseberg ship, which also suggested Juan Antonio.
- The spiral, which was widely voted in the poll.
- Round dragon. We love it!
- Another two dragons, one of them more fantastic and less rigorous, which can be used for other subjects.

Tomorrow we will start to post the entries with each boat that we have done, so you can see how they look like. We will do a unique post for each boat that will post every Friday and Wednesday.

How you can get them? Very easy, you must send an email to imprimimostresd@gmail.com with the combination or combinations that you need. MAD ON PLAYMOBIL does not manage the printing or sale of these parts. We are also customers and we want that the project works just fine, because it will be the way for new collaborative projects. If you have any questions or suggestions, please ask.

How much they cost? 17 € two pieces (front and rear). For orders of more than three sets, there is a discount (15 € each set). Shipping costs are separate and sent by registered mail.

Anything else is needed? The pieces need some sandpaper to let them perfect, especially on some parts. At the end they are printed in red, because we have painted to give them a better look, using the recommendation of Antonio de PLAYMOGALICIA, about MONTANA94 paintings.

We hope you find it interesting. Thank you all for your support.

IMPORTANT: We want to make clear that it is NOT an original Playmobil product. It is a product compatible with Playmobil that is aimed at adults. Its production has no profit. The design belongs to IMPRIMIMOS3D that makes the pieces to meet the demand for collection pieces that can not be obtained by other means. It is not about products aimed at children, or mass production or for resale or reproduction by other means. The acquisition of the pieces is part of an agreement between private parties. Both MADONPLAYMOBIL as IMPRIMIMOS3D respect and accept Playmobil policies in this regard.


viernes, 17 de junio de 2016

3D PRINTABLE PLAYMOBIL VIKING SHIP PARTS (III)


Seguimos adelante con el proyecto. Aún falta afinar la pieza de entrada para que no sea necesario ningún ajuste. Ya sabemos que la encuesta ha marcado como la opción más deseada la clásica (B). Os adelantamos unas imágenes de cómo quedaría la opción de cabeza de dragón redonda en marrón (D):
¡ALUCINANTE! No veo el momento de probarla en un barco. ¿Qué os parece?
 
 
We went ahead with the project. We still need to refine the input part until that no adjustment is necessary. We know that the poll has been marked as the most desirable the classic option (B). I anticipate some images of how the option would head round brown dragon (D):
 
AMAZING! I can not wait to try it on a ship. What do you think?